Drive – Single Geared Twin End (Quill Mounted)
1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Questions? Contact Us
(Manual Number: A-13-M-3)
Click to enlarge
Download a PDF Spec Sheet
Single Geared Twin End Drive Quill Mounted Flywheel Form A-13-M-3
NOTE for Flywheel Bearing: Lubricate once each year with 2 cu. In of Chevron SRI No. 2 grease or Texaco Premium RB No. 2 grease. Grease fitting is located on rear of frame upright, completely accessible at floor level.
| Part # | Part Name |
|---|---|
| 1 | Brake |
| 2 | Capscrew |
| 3 | Bolt |
| 4 | Retaining Ring |
| 5 | Retaining Ring |
| 6 | Brake Hub |
| 7 | Hose Ring |
| 8 | Bolt |
| 9 | Brake Mounting Plate |
| 10 | Hose Ring |
| 11 | Bearing Housing |
| 12 | Bolt |
| 13 | Retaining Ring |
| 14 | Bearing |
| 15 | Retaining Ring |
| 16 | Key |
| 17 | L.H. Drive Shaft |
| 18 | Key |
| 19 | "O"Ring |
| 20 | Retaining Ring |
| 21 | Bearing |
| 22 | Retaining Ring |
| 23 | Bearing Cartridge |
| 24 | Bolt |
| 25 | Drive Bolt |
| 26 | Taperlock Adapter |
| 27 | Coupling |
| 28 | Middle Drive Shaft |
| 29 | Nut |
| 30 | Capscrew |
| 32 | Coupling |
| 33 | Taperlock Adapter |
| 34 | Bearing Cartridge |
| 35 | Retaining Ring |
| 36 | Bearing |
| 37 | Retaining Ring |
| 38 | Key |
| 39 | R.H. Drive Shaft |
| 40 | Key |
| 41 | Retaining Ring |
| 42 | Bearing |
| 43 | Retaining Ring |
| 44 | Quill |
| 45 | Bearing Retainer (When Used) |
| 46 | Bearing |
| 47 | Flywheel |
| 48 | Spacer (When Used) |
| 49 | Clutch Hub |
| 50 | Retaining Ring |
| 51 | Clutch |
| 52 | Shrink Disc |
| 53 | Main Gear |
| 54 | Crankshaft |
| 55 | Dowel |
| 56 | Bushing |
| 57 | Bushing |
| 58 | Bushing |
| 59 | R.H. Outer Bearing Cap |
| 60 | Bolt |
| 61 | Center Bearing Cap |
| 62 | L.H. Outer Bearing Cap |
| 63 | Main Gear |
| 64 | Shrink Disc |
| 65 | Spacer (When Used) |
| 66 | Retaining Ring |
| 67 | Bushing (When used) |
*Refer to FORM A-36 for removal and installation
Click to enlarge
