Single Geared Single End Drive – Form A-13-L-2
1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Preguntas? Inicie un chat
Click to enlarge
Download a PDF Spec Sheet
Single Geared Single End Drive – Form A-13-L-2
NOTE: Flywheel Bearing Lubrication (Once each year) Presses with clutch on driveshaft Serial Nos. 47200 thru 52000: Remove cover from clutch and lubricate through fitting on end of driveshaft.
Presses with Serial Nos. 52000 and above: Lubricate through fitting located on end of driveshaft behind center openeing in disc brake. Use Chevron SRI No. 2 grease. Reassemble parts that have been removed before operating press.
Quill Mounted Flywheel: Some models have provisions for lubricating flywheel bearing located on backplate of flywheel guard or rear of housing under flywheel. On models without these provisions, the flywheel must be removed and bearings replaced once each year. Use Chevron SRI No. 2 grease.
Part # | Part Name |
---|---|
1 | Brake |
2 | Capscrew |
3 | Retaining Ring |
4 | Brake Hub |
5 | Bolt |
6 | Brake Mounting Plate |
7 | Bolt |
8 | Inboard Bearing Cartridge |
9 | "O" Ring |
10 | Retaining Ring |
11 | Bearing |
12 | Retaining Ring |
13 | Key |
14 | Drive Shaft |
15 | Key |
16 | Retaining Ring |
17 | Bearing |
18 | Spacer or Retaining Ring |
19 | Outboard Bearing Cartridge or Quill |
20 | Bolt |
21 | Hose Ring |
22 | Bearing |
23 | Flywheel |
24 | Bearing |
Part # | Part Name |
---|---|
25 | Clutch Hub |
26 | Retaining Ring |
27 | Clutch |
54 | Crankshaft |
55 | Dowel |
56 | Bushing |
57 | Bushing |
58 | Bushing |
59 | R.H. Outer Bearing Cap |
60 | Bolt |
61 | Center Bearing Cap |
62 | L.H. Outer Bearing Cap |
63 | Main Gear |
64 | Shrink Disc |
65 | Grease Fitting (when used) |
60 | Bolt |
61 | Center Bearing Cap |
62 | L.H. Outer Bearing Cap |
63 | Main Gear |
64 | Shrink Disc |
65 | Grease Fitting (when used) |