Single Geared Twin End Drive – Form A-13-M-2
1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Preguntas? Inicie un chat
Click to enlarge
Download a PDF Spec Sheet
Single Geared Twin End Drive – Form A-13-M-2
NOTE: Flywheel Bearing Lubrication (Once Each Year) Presses with clutch on driveshaft Serial Nos. 47200 thru 52000: Remove cover from clutch (part No. 51) and lubricate through fitting on end of driveshaft.
Part No. 66 Presses with Serial Nos. 52000 and above: Lubricate through the fitting (Part No. 65) located on right hand driveshaft (Part No. 39) behind the opening in the crown. Use Chevron SRI No. 2 grease. Reassemble parts that have been removed before operating press.
Part # | Part Name |
---|---|
1 | Brake |
2 | Capscrew |
3 | Bolt |
4 | Retaining Ring |
5 | Retaining Ring |
6 | Brake Hub |
7 | Hose Ring |
8 | Bolt |
9 | Brake Mounting Plate |
10 | Hose Ring |
11 | Bearing Housing |
12 | Bolt |
13 | Retaining Ring |
14 | Bearing |
15 | Retaining Ring |
16 | Key |
17 | L.H. Drive Shaft |
18 | Key |
19 | "O" Ring |
20 | Retaining Ring |
21 | Bearing |
22 | Retaining Ring |
23 | Bearing Cartridge |
24 | Bolt |
25 | Drive Bolt |
26 | Taperlock Adapter |
27 | Coupling |
28 | Middle Drive Shaft |
29 | Nut |
30 | Capscrew |
32 | Coupling |
33 | Taperlock Adapter |
Part # | Part Name |
---|---|
34 | Bearing Cartridge |
35 | Retaining Ring |
36 | Bearing |
37 | Retaining Ring |
38 | Key |
39 | R.H. Drive Shaft |
40 | Key |
41 | Retaining Ring |
42 | Bearing |
43 | Spacer |
44 | Bearing Housing |
45 | Hose Ring |
46 | Bearing |
47 | Flywheel |
48 | Bearing |
49 | Clutch Hub |
50 | Retaining Ring |
51 | Clutch |
52 | Shrink Disc |
53 | Main Gear |
54 | Crankshaft |
55 | Dowel |
56 | Bushing |
57 | Bushing |
58 | Bushing |
59 | R.H. Outer Bearing Cartridge |
60 | Bolt |
61 | Center Bearing Cartridge |
62 | L.H. Outer Bearing Cartridge |
63 | Main Gear |
64 | Shrink Disc |
65 | 45 °Grease Fitting (When Used) |
66 | Grease Fitting (When Used) |
*Refer to FORM A-35 for removal and installation |