Torc-Pac 32
1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Preguntas? Inicie un chat
Click to enlarge
Download a PDF Spec Sheet
Torc-Pac 32
| 32-TON TORC-PAC PRESS SPECIFICATIONS | ||
|---|---|---|
| Capacity | 32 tons | |
| Shaft diameter | At main bearings | 3" At Eccentric 6" (2" & 3" strokes), 8" (4" & 5" strokes) |
| Bolster Area | L RX FBX thickness | 24" x 15" x 2 1/4" |
| Bed opening | LRXFB | 11" x 8" |
| Width through back | 14 1/2" | |
| Depth of throat | 8" standard 10 1/2" optional | |
| Height | 81 3/8"; over counterbalance cylinder-96 3/4" | |
| Basic overall dimensions (Std. frame) | Width | 33 1/4" |
| FB upright | 44" | |
| FB inclined | 62 3/4" | |
| Strokes | 3" std. 2" opt. 4" opt. 5" opt. | |
| Shut height | Standard frame | 10" std. 11" opt. 8 1/2" opt. 8" opt. Note: flanged ram reduces shut height by 3" |
| Opt. high body | 13" std. 14" opt. 11 1/2" opt. 11" opt. High body increases overall height | |
| S.P.M.-Choice of one is standard | 60, 70 to 90, 110, 130 | |
| S.P.M.-Optional | 85 to 170, 100 to 117, 117 to 135, 135 to 152, 152 to 170 | |
| Slide adjustment | 2 1/4" | |
| Approximate weight-(Std. press) | Standard press | 3,400# |
| Slide cap hole | Diameter | 1-9/16" (maximum opt.-2 1/2") Depth 3" |
| Flywheel | Weight | 335# Speed (min.) 462 R.P.M. @ 60 S.P.M. |
| Bolster drilling and special openings | Optional | |
| Cushion stroke and tonnage | at 100 p.s.i opt. | 2 1/2"-3 tons Optional |
| Flanged ram-with or without slide caps | LRXFB | Opt. 15" x 12" |
| Reduces shut height | 3" | |
| Main motor | HP & RPM | 5 HP-1800 R.P.M. |
Click to enlarge
Click to enlarge
