EWB-1003 Bliss HP2-25 THRU HP2-400 Presses
1. Click a link to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Preguntas? Inicie un chat
Jump to Assembly Parts and Manual Drawings
Click to enlarge
Download a PDF Spec Sheet
E.W. Bliss Main Assembly
| Part # | Part Name | Part # | Part Name |
|---|---|---|---|
| 1 | Crown | 14 | Tie Rod |
| 2 | Tie Rod Nut | 15 | Leg R.H. |
| 3 | Crankshaft | 16 | Bed |
| 4 | Upright R.H. | 17 | Key, Frame |
| 5 | Cap Center Bearing | 18 | Leg L.H. |
| 6 | Bushing Center Bearing | 19 | Door, Lube Pump |
| 7 | Upright L.H. | 20 | Flywheel |
| 8 | Cap Screw, or Stud and Nut | 21 | Guard, Upper |
| 9 | Cap, Main Bearing | 22 | Guard, Lower |
| 10 | Bushing, Main Bearing | 23 | Key, Frame |
| 11 | Shim | 24 | Clutch Cover |
| 12 | Gib | 25 | Access Plate |
| 13 | Shim |
Click to enlarge
Download a PDF Spec Sheet
Back Shaft Assembly Geared Press Viewed From Rear of Press
| Part # | Part Name | Part # | Part Name |
|---|---|---|---|
| 1 | Main Gear | 12 | Spacer |
| 2 | Driveshaft | 13 | Flywheel |
| 3 | Cap Screw (Drilled Head) | 14 | Spacer |
| 4 | End Cap | 15 | Collar |
| 5 | Pinion | 16 | Bearing Assembly |
| 6 | Key | 17 | Bearing Housing |
| 7 | Spacer | 18 | Collar |
| 8 | Collar | 19 | Spacer |
| 9 | Bearing Assembly | 20 | Sheave |
| 10 | Bearing Housing | 21 | End Plate |
| 11 | Collar |
Click to enlarge
E.W. Bliss
| Part # | Part Name | Part # | Part Name |
|---|---|---|---|
| 1 | Stud | 14 | Adjusting Sleeve |
| 2 | Nut | 15 | Shaft, Gear |
| 3 | Cap, Connection | 16 | Gear, Slide Adjustment |
| 4 | Bushings, Half | 17 | Locknut |
| 5 | Connection | 18 | Set Screw |
| 6 | Hex, Cap Screw | 19 | Locking Plug |
| 7 | Retainer | 20 | "O" Ring |
| 8 | Shims | 21 | Locking Tee |
| 9 | Bushing, Split | 22 | Slide |
| 10 | Seat, Connection | 23 | Wear Strip (Bronze) |
| 11 | Adjusting Screw | 24 | Wear Strip (Bronze) |
| 12 | Bar, Retainer | 25 | Cap-Screws |
| 13 | Cap Screw | 26 | Dowel |
Click to enlarge
High Production Press Manual
| Part # | Part Name | Part # | Part Name |
|---|---|---|---|
| 1 | Air Motor | 11 | Counter Plate |
| 2 | Motor Bracket | 12 | Screw, Button Head |
| 3 | Motor Bracket | 13 | Shaft |
| 4 | Spacer | 14 | Collar |
| 5 | Miter Gear | 15 | Bracket |
| 6 | Roll Pin | 16 | Worm Gear |
| 7 | Adjustment Shaft | 17 | Miter Gear |
| 8 | Miter Gear | 18 | Cap Screw |
| 9 | Spacer | 19 | Chain Coupling |
| 10 | Gasket | 20 | Shaft |
Click to enlarge
