How to find the parts you need
Clearing 75 Ton OBI
① Click a link to view parts list below or download the spec sheet.
Motor Drive Geared R-7483Motor Drive Flywheel R-8582
Flywheel Brake Geared R-6686
Flywheel Brake Flywheel R-11178
Clutch & Brake Geared or Flywheel R-8913
Driveshaft Geared R-8834
Main Gear Bearing or Flywheel Bearing
Slide Assembly R-10278
Limit Switch Drive R-8971
Counterbalance Cylinder R-11076
Cushion R-11209
Double Cushion R-11106
② Once you know which parts you want to order, request a parts quote.
Click to enlarge drawing
Motor Drive Geared R-7483
| Motor Drive Geared R-7483 | |
|---|---|
| 1 | Motor Base |
| 2 | Pivot Pin |
| 3 | |
| 4 | Sheave |
| 5 | Motor |
| 6 | |
| 7 | Clevis Pin |
| 9 | Motor Base Pivot |
| 10 | Adjustment Stud |
| 11 | Hex Jam Nut |
| 12 | |
| 13 | Pivot Block |
| 14 | Hex Nut |
| 15 | "V"-Belt |
Motor Drive Flywheel R-8582
| Motor Drive Flywheel R-8582 | |
|---|---|
| 1 | "V"-Belts |
| 2 | Nut (2) |
| 3 | Spher. Washer (2) |
| 4 | Motor Base |
| 5 | Support, 3/4"-10 |
| 6 | Motor Sheave |
| 7 | Motor |
| 8 | Cap Screw |
| 9 | Locknut |
| 10 | Ring |
| 11 | Pin |
| 12 | Support (2) |
| 13 | Pin (2) |
| 14 | Collar (2) |
Flywheel Brake Geared R-6686
| Flywheel Brake Geared R-6686 | |
|---|---|
| 1 | Spring |
| 2 | Housing |
| 3 | Cap |
| 4 | Hex Hd. Cap Screw |
| 5 | Pipe Plug |
| 6 | Brake Shoe |
| 7 | Dowel Pin |
| 8 | Lining |
| 9 | Rivet |
| 10 | Piston |
| 11 | Packing |
| 12 | H.H. Cap Screw (4) |
Flywheel Brake Flywheel R-11178
| Flywheel Brake Flywheel R-11178 | |
|---|---|
| 1 | Brake Lining |
| 2 | Brake Shoe |
| 3 | Pipe Plug |
| 4 | Dowel Pin |
| 5 | Housing Cap |
| 6 | Spring |
| 7 | H.H.C.S. |
| 8 | Housing |
| 9 | Packing |
| 10 | Piston |
| 11 | H.H. Cap Screw (4) |
| 12 | Key |
| 13 | Soc. H. Cap Screw |
| 14 | Brass Rivet |
Clutch & Brake Geared or Flywheel R-8913
| 1 | Clutch Drive Ring |
| 2 | Brake Fric. Disc |
| 3 | Outer "E"-Packing |
| 4 | Piston |
| 5 | "O"-Ring (2) |
| 6 | Locknut |
| 7 | Inner "E"-Packing |
| 8 | Clutch Cylinder |
| 9 | |
| 10 | Cap Screw |
| 11 | Key |
| 12 | Gasket, 1/16" |
| 13 | Interm. Disc (2) |
| 14 | Spring |
| 15 | Key |
| 16 | Clutch Drive Hub |
| 17 | Clutch Friction |
| 18 | Dowel Pin |
| 19 | Pipe Plug |
| 20 | |
| 21 | Locknut |
| 22 | Shoulder Scr, 1/2-13 |
| 23 | Shim |
| 24 | Spacer |
Driveshaft Geared R-8834
| Driveshaft Geared R-8834 | |
|---|---|
| 1 | Key (2) |
| 2 | End Plate |
| 3 | Pinion, Herr. |
| 4 | Retainer |
| 5 | Gasket |
| 6 | Bearing |
| 7 | Bearing Spacer |
| 8 | Flywheel |
| 9 | Driveshaft |
| 10 | Bearing |
| 11 | Bearing Housing, LH |
| 12 | Bearing Retainer |
| 13 | End Plate |
| 14 | Key (2) |
| 15 | Gib Taper Key |
| 16 | Bearing Housing, RH |
| 17 | Spacer |
Main Gear Bearing or Flywheel Bearing
| Main Gear Bearing or Flywheel Bearing | |
|---|---|
| 1 | Retainer (2) |
| 2 | Slinger Plate (2) |
| 3 | Retainer |
| 4 | Cone Spacer |
| 5 | Cup Spacer |
| 6 | Bearing (2) |
| 7 | Spacer |
Slide Assembly R-10278
| Slide Assembly R-10278 | |
|---|---|
| 1 | Crankshaft |
| 2 | |
| 3 | Hex Hd. Cap. Scr. |
| 4 | Connection Cap |
| 5 | Bushing |
| 6 | Bearing Retainer (2) |
| 7 | Bushing (2) |
| 8 | Wrist Pin Bushing |
| 9 | Stop Screw |
| 10 | Front Gibs (2) |
| 11 | Hex Nut |
| 12 | Stud |
| 13 | Cap Screw |
| 14 | Dowel Pin |
| 15 | Rear Gibs (2) |
| 16 | Cap Screw (8) |
| 17 | Slide |
| 18 | Slide Adjust Housing |
| 19 | Wrist Pin |
| 20 | Sq. Hd. Jack Screw |
| 21 | Jam Nut (6) |
| 22 | |
| 23 | Connection Screw Nut |
| 24 | Flat Hd. Mach. Scr. (4) |
| 25 | Bevel Gear |
| 26 | Connection Screw |
| 27 | Knockout Bar Stop (2) |
| 28 | "T"-Bolt (2) |
| 29 | Nut (2) |
| 30 | Knockout Bar |
| 31 | |
| 32 | Soc. Hd. Cap Screw |
| 33 | |
| 34 | |
| 35 | Slide Cap |
| 36 | |
| 37 | Plain Washer (6) |
| 38 | Cap Screw (6) |
| 39 | Connection Strap |
| 40 | Housing |
| 41 | Cap Screw |
| 42 | Shaft Lock |
| 43 | Bevel Pinion (hand) |
| 44 | Dowel Pin (4) |
| 45 | "O"-Ring |
| 46 | Oil Seal, CROS #9934 |
| 47 | Handle Stud |
| 48 | Control Knob |
| 49 | Retaining Ring, TruArc |
| 50 | |
| 51 | Wear Strip (2, front) Standard Sl. |
| 52 | Wear Strip (2, rear) Standard Sl. |
| Wear Strip (2, front) Flanged Sl. | |
| Wear Strip (2, rear) Flanged Sl. |
Power Slide Adjustment Gearbox R-10466
| Power Slide Adjustment Gearbox R-10466 | |
|---|---|
| 1 | Cap Screw (4) |
| 2 | Oil Cup |
| 3 | Cap Screw |
| 4 | Shaft Lock |
| 5 | Cap Screw (6) |
| 6 | Gear Housing |
| 7 | Retaining Ring |
| 8 | Knob (2) |
| 9 | Handle |
| 10 | Lock Stud |
| 11 | Cap Screw |
| 12 | Motor Base |
| 13 | Cap Screw (3) |
| 14 | Roll Pin |
| 15 | Set Screw |
| 17 | Gasket |
| 18 | Spacer |
| 19 | Key |
| 20 | Bevel Pinion Shaft |
| 21 | Bushing |
| 22 | "O"-Ring |
| 23 | Bevel Gear Pinion |
| 24 | Spacer |
| 25 | Bushing |
| 26 | Gasket |
| 27 | Retainer |
| 28 | Oil Seal |
| 29 | Bevel Pinion, 15T |
| 30 | Air Motor |
| 31 | Key |
| 32 | |
| 33 | Bevel Pinion |
| 34 | Gasket |
| 35 | Coupling |
| 36 | Counter |
| 37 | Bushing |
| 38 | Bushing |
| 39 | Oil Seal |
| 40 | Bevel Gear |
| 41 | Bushing |
| 42 | Bevel Pinion |
| 43 | Housing |
| 44 | Gasket |
| 45 | Housing Cap |
| 49 | Roll Pin |
| 50 | Roll Pin |
Limit Switch Drive R-8971
| Limit Switch Drive R-8971 | |
|---|---|
| 1 | Limit Switch |
| 2 | Coupling |
| 3 | Chain |
| 4 | Motion Detector |
| 6 | Drive Sprocket |
| 9 | Driven Sprocket |
| 10 | Set Screw |
| 11 | Key |
| 12 | External Adjust Mech. |
| 16 | Set Screw |
| 17 | Key |
| 18 | Sprocket |
| 19 | Chain |
| 20 | Sprocket |
Counterbalance Cylinder R-11076
| Counterbalance Cylinder R-11076 | |
|---|---|
| 1 | Locknut |
| 2 | Washer |
| 3 | "O"-Ring, Note 1 |
| 4 | Gasket |
| 5 | Felt Washer |
| 6 | "U"-Packing |
| 7 | Piston |
| 8 | Tie Rod (4) |
| 9 | Inner Cylinder |
| 10 | "U"-Pkng |
| 11 | Piston Shaft |
| 12 | Washer |
| 13 | Cotter Pin |
| 14 | Locknut |
| 15 | Soc. Hd. Cap Screw |
| 16 | Cylinder Head |
| 17 | Outer Cylinder |
| 18 | Cylinder Cover |
| 19 | Washer (4) |
| 20 | Hex Nut (4) |
| Slide Ctr. Bal. Bracket |
Cushion R-11209
| Cushion R-11209 | |
|---|---|
| 1 | Pressure Pad |
| 2 | Piston |
| 3 | Cylinder |
| 4 | Support Rod - Front Retaining Rings (2) |
| 7 | Packing, 16" |
| 8 | Cylinder Cover |
| H.H.C.S. (8) | |
| 9 | Gasket |
| 11 | Support Rod - Rear |
| 12 | Cover Shield |
Double Cushion R-11106
| Double Cushion R-11106 | |
|---|---|
| 1 | Pressure Pad |
| 2 | Cover Plate |
| 3 | Outer Piston |
| 4 | Piston Shaft |
| 5 | Cylinder, 16" |
| 6 | Flange Packing |
| 7 | Retainer |
| 8 | Washer (2) |
| 9 | Locknut (2) |
| 10 | Support Rod - Rear |
| 11 | "E"-Packing, 8" |
| 12 | "E"-Packing, 16" |
| 13 | Inner Piston |
| 14 | Cylinder, 8" |
| 15 | Piston Nut (2) |
| 16 | Gasket - Rear |
| 17 | Gasket - Front |
| 18 | Cylinder Cover |
| 19 | Gasket |
| 20 | Retaining Ring (2) |
| 21 | Support Rod - F |
Why use genuine parts?
① Good and Services Warranty
Purchase press parts with confidence from BCN Technical Services. We guarantee at the time of delivery, the goods will be free from defects in materials and workmanship. We will perform services in a prompt, professional and workmanlike manner. View our Goods and Services Warranty for details.
② Original OEM Specifications
Replacement parts are manufactured to original OEM specifications from record sets maintained by serial number, so there’s no guessing or wondering if a part will fit. We have original drawings, manufacturing expertise, and the experience of a team of engineers who know your press inside and out.
③ Delivery
BCN Technical Services has an extensive inventory of the most requested OEM replacement parts in stock at our facility in Hastings, MI. Over 14,000 unique spare parts for presses are kept on hand. Our experienced staff is dedicated to quickly providing that critical part, which allows you to avoid delayed repairs, lost productivity and lost revenue.
Sign-up to receive updates and important information from BCN Technical Services.
Hours of Operation
Monday–Friday:
8 a.m.–5 p.m.
Saturday–Sunday:
Closed
BCN Technical Services, Inc.
1004 E State St Hastings, MI 49058
269-948-3300
info@bcntechserv.com