Bliss|Bliss Press Parts|Drive – Single Geared Twin End (Abs)

Drive – Single Geared Twin End (Abs)

How to find the parts you need

1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote

Questions? Contact Us

(Manual Number: A-13-M-2)

Single Geared Twin End Drive – Form A-13-M-2

NOTE: Flywheel Bearing Lubrication (Once Each Year) Presses with clutch on driveshaft Serial Nos. 47200 thru 52000: Remove cover from clutch (part No. 51) and lubricate through fitting on end of driveshaft.

Part No. 66 Presses with Serial Nos. 52000 and above: Lubricate through the fitting (Part No. 65) located on right hand driveshaft (Part No. 39) behind the opening in the crown. Use Chevron SRI No. 2 grease. Reassemble parts that have been removed before operating press.

Part #Part Name
1Brake
2Capscrew
3Bolt
4Retaining Ring
5Retaining Ring
6Brake Hub
7Hose Ring
8Bolt
9Brake Mounting Plate
10Hose Ring
11Bearing Housing
12Bolt
13Retaining Ring
14Bearing
15Retaining Ring
16Key
17L.H. Drive Shaft
18Key
19"O" Ring
20Retaining Ring
21Bearing
22Retaining Ring
23Bearing Cartridge
24Bolt
25Drive Bolt
26Taperlock Adapter
27Coupling
28Middle Drive Shaft
29Nut
30Capscrew
32Coupling
33Taperlock Adapter
Part #Part Name
34Bearing Cartridge
35Retaining Ring
36Bearing
37Retaining Ring
38Key
39R.H. Drive Shaft
40Key
41Retaining Ring
42Bearing
43Spacer
44Bearing Housing
45Hose Ring
46Bearing
47Flywheel
48Bearing
49Clutch Hub
50Retaining Ring
51Clutch
52Shrink Disc
53Main Gear
54Crankshaft
55Dowel
56Bushing
57Bushing
58Bushing
59R.H. Outer Bearing Cartridge
60Bolt
61Center Bearing Cartridge
62L.H. Outer Bearing Cartridge
63Main Gear
64Shrink Disc
6545 °Grease Fitting (When Used)
66Grease Fitting (When Used)
*Refer to FORM A-35 for removal and installation