SINGLE GEARED TWIN END DRIVE - FORM A-13-M-2
Visión general
Single Geared Twin End Drive – Información de especificación de la forma A-13-M-2. Para descargar un PDF o para obtener información sobre cómo encontrar su número de serie, utilice el botón correspondiente a continuación.
NOTE: Flywheel Bearing Lubrication (Once Each Year) Presses with clutch on driveshaft Serial Nos. 47200 thru 52000-remove cover from clutch (part No. 51) and lubricate through fitting on end of driveshaft. (Part No. 66) Presses with Serial Nos. 52000 and above lubricate through the fitting (Part No. 65) located on right hand driveshaft (Part No. 39) behind the opening in the crown. Use Chevron SRI No. 2 grease. Reassemble parts that have been removed before operating press. |
A-13-M-2 SINGLE GEARED-TWIN END DRIVE | |
---|---|
1 | Brake |
2 | Capscrew |
3 | Bolt |
4 | Retaining Ring |
5 | Retaining Ring |
6 | Brake Hub |
7 | Hose Ring |
8 | Bolt |
9 | Brake Mounting Plate |
10 | Hose Ring |
11 | Bearing Housing |
12 | Bolt |
13 | Retaining Ring |
14 | Bearing |
15 | Retaining Ring |
16 | Key |
17 | L.H. Drive Shaft |
18 | Key |
19 | "O" Ring |
20 | Retaining Ring |
21 | Bearing |
22 | Retaining Ring |
23 | Bearing Cartridge |
24 | Bolt |
25 | Drive Bolt |
26 | Taperlock Adapter |
27 | Coupling |
28 | Middle Drive Shaft |
29 | Nut |
30 | Capscrew |
32 | Coupling |
33 | Taperlock Adapter |
A-13-M-2 SINGLE GEARED-TWIN END DRIVE | |
---|---|
34 | Bearing Cartridge |
35 | Retaining Ring |
36 | Bearing |
37 | Retaining Ring |
38 | Key |
39 | R.H. Drive Shaft |
40 | Key |
41 | Retaining Ring |
42 | Bearing |
43 | Spacer |
44 | Bearing Housing |
45 | Hose Ring |
46 | Bearing |
47 | Flywheel |
48 | Bearing |
49 | Clutch Hub |
50 | Retaining Ring |
51 | Clutch |
52 | Shrink Disc |
53 | Main Gear |
54 | Crankshaft |
55 | Dowel |
56 | Bushing |
57 | Bushing |
58 | Bushing |
59 | R.H. Outer Bearing Cartridge |
60 | Bolt |
61 | Center Bearing Cartridge |
62 | L.H. Outer Bearing Cartridge |
63 | Main Gear |
64 | Shrink Disc |
65 | 45 °Grease Fitting (When Used) |
66 | Grease Fitting (When Used) |
*Refer to FORM A-35 for removal and installation |
BCN Technical Services
1004 E State St Hastings, MI 49058
Regístrese para recibir ventas, actualizaciones e información importante de Bliss Clearing Niagara Technical Services.
Horas de operación De lunes a viernes: 8 a.m. a 5 p.m. Sábado-Domingo: Cerrado
BCN Technical Services, Inc. 1004 E State St Hastings, MI 49058
269-948-3300
info@bcntechserv.com