Clearing 45 Ton OBI
1. Click a link to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Preguntas? Inicie un chat
Jump to Assembly Parts and Manual Drawings
Click to enlarge
Download a PDF Spec Sheet
Slide Adjustment R-8205
| Part # | Part Name |
|---|---|
| 1 | Hex Nut, 1"-8 |
| 2 | Knockout Rod |
| 3 | Sq. Hd. Set Screw |
| 4 | Jamb Nut |
| 5 | R.H. Gib |
| 6 | Knockout Bar |
| 7 | Hx. Hd. Cap Screw |
| 8 | Stud |
| 9 | Hex Nut |
| 10 | Slide Cap |
| 11 | Roll Pin |
| 12 | L.H. Gib |
| 13 | Hx. Hd. Cap Screw |
| 14 | Hx. Hd. Cap Screw |
| 15 | Slide |
Click to enlarge
Motor Drive R-8204
| Part # | Part Name |
|---|---|
| 1 | Vbelts |
| 2 | Hx. Hd. Cap Screws |
| 3 | Security Locknut |
| 4 | 10 HP Main Motor |
| 5 | Sheave |
| 6 | Cotter Pins |
| 7 | Hx. Hd. Cap Screws |
| 8 | Bracket |
| 9 | Washers |
| 10 | Motor Support Pin |
| 11 | 10 hp Motor Support |
| 12 | Pivot Pin |
| 13 | Rod End |
| 14 | Hex. Nut |
| 15 | Spacers (2) |
| 16 | Yoke |
| 17 | Pin |
| 18 | Cotter Pins |
Click to enlarge
Head Assembly R-8203
| Part # | Part Name |
|---|---|
| 1 | Head |
| 2 | Ecc. Bushing F. |
| 3 | Cam Limit Switch |
| 4 | Lock Sleeve |
| 5 | Ecc. Shaft |
| 6 | Front Cover |
| 7 | Ecc. Bushing |
| 8 | Connection |
| 9 | Retainer Ring |
| 10 | Ecc. Bushing R. |
| 11 | Oil Seal |
| 12 | Main Gear |
| 13 | Shaft End Cover |
| 14 | Main Gear Key |
| 15 | Seal Housing |
| 17 | Gasket |
Click to enlarge
Variable Stroke Assembly R-10913
| Part # | Part Name |
|---|---|
| 1 | Pull Rod Nut |
| 2 | Lock Sleeve |
| 3 | Limit Switch Cam (std.) |
| 4 | Eccentric |
| 5 | Eccentric Swap |
| 6 | Bushing |
| 7 | Dowel Pin (3) |
| 8 | Eccentric Gear Plate |
| 9 | Key |
| 10 | Pull Rod Nut |
| 11 | Roll Pin |
| 12 | Key (2), 7/8 x 7/8 x 5-11/16 |
| 13 | Eccentric Shaft |
| 14 | Bushing, rear |
| 15 | Bushing, front |
| 16 | Pull Rod |
| 17 | Soc. Set Scr., 1/4-28 x 1" LG |
| 18 | Key |
| 19 | Spacer |
| 20 | Soc. Set Scr., 3/4-10 x 1" LG |
| 21 | Sprocket, Note 1 |
| 22 | Pull Rod |
| 23 | Key |
| 24 | Lock Screw |
| 25 | Eccentric Hub |
| Front Cover |
Click to enlarge
Indicator Assembly R-11746 (New Style)
| Part # | Part Name |
|---|---|
| 1 | Scale |
| 2 | Indicator Screw |
| 3 | Connection Nut (upper) |
| 4 | Connection Nut (lower) |
| 5 | Adjustment Lock Plate |
| 6 | Slide Adj. Lock Nut |
| 7 | Stud |
| 8 | Slotted Hex Nut |
| 9 | Pipe Plug |
| 10 | Dowel Pin |
| 11 | Rack |
| 12 | Roll Pin |
| 13 | Adjustment Lock Cover |
| 14 | Spring |
| 15 | Knurled Nut |
| 16 | Gear Rack Holder |
| 17 | Dowel Pin |
| 18 | Soc. Hd. Cap Screws |
| Connection Screw, New style | |
| Connection Screw, Old style |
Click to enlarge
Indicator Assembly R-8207 (Old Style)
| Part # | Part Name |
|---|---|
| 1 | Scale |
| 2 | Indicator Screw |
| 3 | Connection Nut |
| 4 | Adj. Lock Plate |
Click to enlarge
Clearelease Mechanism R-8206
| Part # | Part Name |
|---|---|
| 1 | Wrist Pin |
| 2 | Locking Nut |
| 3 | Wrist Pin Bushing |
| 4 | Locating Dowel |
Click to enlarge
Counter Balance R-11744
| Part # | Part Name |
|---|---|
| 1 | Hex Nut |
| 2 | Tie Rod |
| 3 | Locknut |
| 4 | Steel Washer |
| 5 | Piston |
| 6 | "U"-Cup Packing |
| 7 | Hx. Hd. Cap Screw |
| 8 | Counterbal. Shaft |
| 9 | Roll Pin |
| 10 | Cotter Pin (2) |
| 11 | Screw Eye |
| 12 | Spring Pin |
| 13 | Clevis Pin |
| 14 | Clevis |
| 15 | Cylinder Head |
| 16 | Cylinder - Inner |
| 17 | Cylinder - Outer |
| 18 | "U"-Cup Packing |
| 19 | Felt Wiper, style 8501 |
| 20 | Gasket, 8"x4"x 1/16" |
| 21 | Gasket, 8"x4"x 1/16" |
| 22 | Cylinder Cover |
Click to enlarge
Cushion Assembly R-8210
| Part # | Part Name |
|---|---|
| 1 | Pressure Plate |
| 2 | Cushion Cylinder |
| 3 | Gasket |
| 4 | Soc. Hd. Cap Screw |
| 5 | Soc. Hd. Cap Screw |
| 6 | Cushion Support |
| 7 | Support Pin |
| 8 | "U"-Packing |
| 9 | Cushion Piston |
| 10 | Soc. Hd. Cap Screw |
Click to enlarge
