Torc-Pac 45
1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Preguntas? Inicie un chat
Click to enlarge
Download a PDF Spec Sheet
Torc-Pac 45
| 45-Ton Torc-Pac Press Specifications | |||
|---|---|---|---|
| Capacity | 45 tons | ||
| Shaft diameter | At main bearings | 3 3/4" At Eccentric 7 3/4" (2", 3" & 4" strokes), 9 3/4" (6" stroke) | |
| Bolster Area | L RX FBX thickness | 28" x 18" x 2 1/2" | |
| Bed opening | LRXFB | 14" x 11" | |
| Width through back | 15 1/2" | ||
| Depth of throat | 9 1/2" std. 12 1/2" opt. | ||
| Height | 92 1/2"; over counterbalance cylinder-107 7/8" | ||
| Basic overall dimensions (Std. frame) | Width | 40 1/2" | |
| FB upright | 53" | ||
| FB inclined | 62" | ||
| Strokes | 4" std. 2" opt. 3" opt. 6" opt. | ||
| Note: flanged ram reduces shut height by 3 1/2" | |||
| Shut height | Standard frame | 12" 14" 12 1/2" 10" | |
| Opt. high body | 15" 17" 15 1/2" 13" High body increases overall height | ||
| S.P.M.-Choice of one is standard | 60, 75, 90, 100 | ||
| S.P.M.-Optional | 60 to 100, 59 to 69, 69 to 80, 86 to 96, 96 to 108 | ||
| Slide adjustment | 2 1/2" | ||
| Approximate weight-(Std. press) | Standard press | 6,000# | |
| Slide cap hole | Diameter | 2" (maximum opt.-3") Depth 3 1/4" | |
| Flywheel | Weight | 350#-high speed 190# Speed (std.) 706 R.P.M. @ 60 S.P.M. | |
| Bolster drilling and special openings | Optional | ||
| Cushion stroke and tonnage | at 100 p.s.i opt. | 3"-5.6 tons Optional | |
| Flanged ram-with or without slide caps | LRXFB | Opt. 18" x 14" | |
| Reduces shut height | 3 1/2" | ||
| Main motor | HP & RPM | 7 1/2 HP-1800 R.P.M. |
Click to enlarge
Click to enlarge
