Torc-Pac 60
1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Preguntas? Inicie un chat
Click to enlarge
Download a PDF Spec Sheet
Torc-Pac 60
| 60-Ton Torc-Pac Press Specifications | |||
|---|---|---|---|
| Capacity | 60 tons | ||
| Shaft diameter | At main bearings | 4 1/4" At Eccentric 9 3/8" (3", 4" & 5" strokes), 11 3/8" (6" & 7" strokes) | |
| Bolster Area | L RX FBX thickness | 32" x 21" x 3" | |
| Bed opening | LRXFB | 17" x 13" | |
| Width through back | 19" | ||
| Depth of throat | 11" standard. 14" optional | ||
| Height | 108"; over counterbalance cylinder-125" | ||
| Basic overall dimensions (Std. frame) | Width | 48 1/4" | |
| FB upright | 62 1/4" | ||
| FB inclined | 69" | ||
| Strokes | 4" std. 3" opt. 5" opt. 6" opt. 7" opt. | ||
| Note: flanged ram reduces shut height by 3 3/4" | |||
| Shut height | Standard frame | 13 1/4" 14 1/4" 12 1/4" 11 1/4" 10 1/4" | |
| Opt. high body | 17 1/4" 18 1/4" 16 1/4" 15 1/4" 14 1/4" High body increases overall height | ||
| S.P.M.-Choice of one is standard | 90 | ||
| S.P.M.-Optional | 45, 60, 75, 45 to 90, 43 to 50, 50 to 58, 58 to 65, 77 to 86 | ||
| Slide adjustment | 3" | ||
| Approximate weight-(Std. press) | Standard press | 9,800# | |
| Slide cap hole | Diameter | 2" (maximum opt.-3") Depth 3 1/4" | |
| Flywheel | Weight | 415#-high speed 133# Speed (std.) 657 R.P.M. @ 45 S.P.M. | |
| Bolster drilling and special openings | Optional | ||
| Cushion stroke and tonnage | at 100 p.s.i opt. | 3 1/2"-7.5 tons Optional | |
| Flanged ram-with or without slide caps | LRXFB | Opt. 21" x 16" | |
| Reduces shut height | 3 3/4" | ||
| Main motor | HP & RPM | 10 HP-1800 R.P.M. |
Click to enlarge
Click to enlarge
