Drive – Double Geared Twin End (Shaft Mounted)
1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Questions? Contact Us
(Manual Number: A-13-K-1-A)
Click to enlarge
Download a PDF Spec Sheet
Double Geared Twin End Drive Shaft Mounted Flywheel – Form A-13-K-1-A
| Part # | Part Name |
|---|---|
| 1 | Driveshaft Bearing Cartridge |
| 2 | Retaining Ring |
| 3 | Bearing |
| 4 | Retaining Ring |
| 5 | Driveshaft |
| 6 | Key |
| 7 | Retaining Ring |
| 8 | Bearing |
| 9 | Retaining Ring |
| 10 | Labyrinth Ring |
| 11 | "O" Ring |
| 12 | Drive Shaft Bearing Housing |
| 13 | Key |
| 14 | Clamp Collar |
| 15 | Bolt |
| 16 | Bearing Retainer (When Used) |
| 17 | Bearing |
| 18 | Labyrinth Ring |
| 19 | Retaining Ring |
| 20 | Bearing Spacer |
| 21 | Hose Ring (When used) |
| 22 | Bearing |
| 23 | Flywheel |
| 24 | Clutch Hub |
| 25 | Retaining Ring |
| 26 | Clutch |
| 27 | Taper Lock Adapter (When Used) |
| 28 | Bolt |
| 29 | Coupling |
| 30 | Center Driveshaft |
| 31 | Capscrew (When Used) |
| 32 | Taper Lock Adapter (When Used) |
| 33 | Bolt |
| 34 | R.H. Intermediate Shaft Bearing Bracket |
| 35 | Capscrew (When Used) |
| 36 | Retaining Ring |
| 37 | Bearing |
| 38 | R.H. Intermediate Shaft Bearing Retainer |
| 39 | Spacer |
| 40 | Capscrew |
| 41 | Taper Lock Adapter or Shrink Disc (When Used) |
| 42 | Intermediate Gear |
| 43 | R.H. Intermediate Shaft Bearing Cartridge |
| 44 | Retaining Ring |
| 45 | Bearing |
| 46 | Retaining Ring |
| 47 | Key |
| 48 | Key (When Used) |
| 49 | R.H. Intermediate Shaft |
| 50 | Brake |
| 51 | Retaining Ring |
| 52 | Brake Hub |
| 53 | Brake Adapter Plate Ring (When Used) |
| 54 | Hose Ring (When Used) |
| 55 | Brake Adapter Plate |
| 56 | Hose Ring |
| 57 | Bolt |
| 58 | L.H. Bearing Housing |
| 59 | Retaining Ring |
| 60 | Bearing |
| 61 | Retaining Ring |
| 62 | Key |
| 63 | L.H. Intermediate Shaft |
| 64 | Key |
| 65 | "O" Ring |
| 66 | Retaining Ring |
| 67 | Bearing |
| 68 | Retaining Ring |
| 69 | L.H. Bearing Cartridge |
| 70 | Capscrew |
| 71 | Shrink Disc |
| 72 | Main Gear |
| 73 | Crankshaft |
| 74 | Bushing |
| 75 | Dowel |
| 76 | Bushing |
| 77 | Bushing |
| 78 | Retaining Ring |
| 79 | Crankshaft Sprocket |
| 80 | Main Gear |
| 81 | Shrink Disc |
| 82 | L.H. Bearing Cap |
| 83 | Center Bearing Cap |
| 84 | Bolt |
| 85 | R.H. Bearing Cap |
| 86 | Tapered Keys (When Used) |
| 87 | Keyed Crankshaft (When Used) |
| 88 | Tapered Keys (When Used) |
| 89 | Sprocket (When Used) |
| 90 | Retaining Ring (When Used) |
| 91 | Plug (When Used) |
| 92 | Grease Fitting (When Used) |
| 93 | Grease Fitting (When Used) |
NOTE: Flywheel Bearing Lubrication (Once Each Year) Presses with clutch or driveshaft Serial Nos. 47200 thru 52000: Remove cover from clutch (Part No. 26) and lubricate through fitting on the end of the driveshaft (Part No. 93).
Presses with Serial No. 52000 and above: Remove plug (Part No. 91) from Bearing Cartridge (Part No. 1) and lubricate through fitting on end of driveshaft (Part No. 92). Use Chevron SRI No. 2 grease. Reasseble parts that have been removed before operating press.
*Refer to FORM A-36 for removal and installation.
Click to enlarge
