3 and 4 Inch Roll Bender
1. Click a link to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Questions? Contact Us
Jump to Assembly Parts and Manual Drawings
(Manual Number: J-6-B)
3 and 4 Inch Roll Bender
Power Driven Gear Box (Optional)
Parallel Rear Roll Adjustment
Click to enlarge
Download a PDF Spec Sheet
3 and 4 Inch Roll Bender
| Part # | Part Name |
|---|---|
| 1 | Cover Mounting Screw |
| 2 | Cover |
| 3 | Retainer Bolt |
| 4 | Washer |
| 5 | Main Gear |
| 6 | *Rear Idler Pin (3 in. models only) |
| 7 | *Rear Idler Gear (3 in. models only) |
| 8 | *Drive Pinion Gear |
| 9 | *Drive Shaft |
| 10 | *Key |
| 11 | *Set Screw |
| 12 | *Drive Shaft Collar |
| 13 | *Crank |
| 14 | *Washer |
| 15 | *Crank Handle Pin |
| 16 | *Crank Handle |
| 17 | Pin |
| 18 | Cam Pin |
| 19 | Cam Handle |
| 20 | Cam |
| 21 | Pin |
| 22 | Upper Roll Washer |
| 23 | Limit Switch Bracket |
| 24 | Upper Roll Bushing |
| 25 | Set Screw |
| 26 | Link Pin Collar |
| 27 | Link |
| 28 | Link |
| 29 | Lower Roll Connection Gear |
| 30 | Rear Roll Connection Gear |
| 31 | Idler Gear (4 in. models have Bushing) |
| 32 | Link |
| 33 | Link |
| 34 | Link Pin |
| 35 | Pin |
| 36 | Upper Roll Collar |
| 37 | Upper Roll Connection Gear |
| 38 | Set Screw |
| 39 | Pins (4 in. models only) |
| 40 | Idler Pins |
| 41 | Idler Gears (4 in. models have Bushings) |
| 42 | Set Screw (3 in. models only) |
| 43 | Set Screw (3 in. models only) |
| 44 | Oil Spouts (4 in. models only) |
| 45 | Gear Bracket |
| 46 | Upper Roll Key |
| 47 | Upper Roll |
| 48 | Rear Roll Key |
| 49 | Rear Roll |
| 50 | Lower Roll Keys |
| 51 | Lower Roll |
| 52 | L.H. Lower Front Bearing |
| 53 | L.H. Rear Bearing |
| 54 | R.H. Lower Front Bearing |
| 55 | R.H. Rear Bearing |
| 56 | Square Washer (Opening must be down) |
| 57 | Adjusting Screw Pin (One supplied with 3 in. models) |
| 58 | Knobs |
| 59 | Adjusting Screw Pin (One supplied with 3 in. models) |
| 60 | L.H. Front Adjusting Screw |
| 61 | R.H. Front Adjusting Screw |
| 62 | Rear Adjusting Screws |
| 63 | Nipple (4 in. models only) |
| 64 | Reducer (4 in. models only) |
| 65 | Lock Nut |
| 66 | Upper Cone Screw |
| 67 | Lock Nut |
| 68 | Lower Cone Screw |
| 69 | Housing Mounting Screw |
| 70 | Dowel Pin |
| 71 | L.H. Housing |
| 72 | Base (Bench type shown) |
| 73 | R.H. Housing |
| 74 | *Grease Fitting (3 in. models only) |
| 75 | Grease Connection (3 in. Power Driven models only) |
| 76 | Roll Position Scale |
| 77 | Pin (3 in. models only) |
| 82 | Sheave Bracket |
| 83 | Sheave Bracket |
| 84 | Sheave |
| 85 | Shoulder Bolt |
| 86 | Nut |
| 87 | Bolt |
| 88 | Pin |
| 89 | Stop Cable |
| 90 | Limit Switch |
| 91 | Screw |
| 92 | Screw |
| 93 | Cover |
| 94 | Screw |
| 95 | Limit Switch Actuator |
| 96 | Set Screw |
| 97 | Shaft |
| 98 | Pin |
| 99 | Washer |
| 100 | Spring |
| *Hand Operated Models Only |
Click to enlarge
Power Driven Gear Box (Optional)
| Part # | Part Name |
|---|---|
| 1 | Belt Guard |
| 2 | V Belts |
| 3 | Sheaves |
| 4 | Belt Guard Mounting Bracket |
| 5 | Bolt |
| 6 | Drive Motor |
| 7 | Motor Mounting Plate |
| 8 | Jam Nut |
| 9 | Set Screw |
| 10 | Motor Mounting Hinge Pin |
| 11 | Bolt |
| 12 | Bolt |
| 13 | Gear Box Cover |
| 14 | Lock Nut |
| 15 | Lock Washer |
| 16 | Bearing |
| 17 | Pulley Shaft Pinion |
| 18 | Collar |
| 19 | Set Screw |
| 20 | Lock Nut |
| 21 | Lock Washer |
| 22 | Bearing |
| 23 | Key |
| 24 | Pulley Shaft |
| 25 | Key |
| 26 | Bearing Cover |
| 27 | Screw |
| 28 | Intermediate Gear Axle |
| 29 | Bushings |
| 30 | Intermediate Gear |
| 31 | Intermediate Pinion |
| 32 | Pipe Plug |
| 33 | Street Elbow |
| 34 | Bolt |
| 35 | Lock Washer |
| 36 | Gear Box Housing |
| 37 | Pipe Plug |
| 38 | Roll Pin |
| 39 | Collar |
| 40 | Bushing |
| 41 | Retaining Ring |
| 42 | Main Gear |
| 43 | Keys |
| 44 | Drive Shaft |
| 45 | Bushing |
| 46 | Main Pinion |
| 47 | *Sleeve Pinion Stud |
| 48 | *Bushing |
| 49 | *Sleeve Pinion |
| 50 | *Key |
| 51 | *Bushing |
| 52 | *Dowels |
| 53 | *Sleeve Pinion Gear |
| 54 | *Adapter |
| 55 | *Bolt |
| 56 | *Set Screw |
| 57 | *Grease Fitting |
| 58 | Set Screw |
Click to enlarge
Parallel Rear Roll Adjustment
| Part # | Part Name |
|---|---|
| 1 | Bolt |
| 2 | Counter Bracket |
| 3 | Counter |
| 4 | Screw |
| 5 | Coupling |
| 6 | Flexible Shaft |
| 7 | Cap Screw |
| 8 | Rear Roll Adjusting Nuts |
| 9 | Rear Roll Adjusting Screws |
| 10 | Flanged Bushings |
| 11 | Bevel Gear Brackets |
| 12 | Cap Screw |
| 13 | Removable Spacer |
| 14 | Bevel Gears |
| 15 | Set Screws |
| 16 | Washers |
| 17 | Cap Screws |
| 18 | Cover |
| 19 | Screws |
| 20 | Roll Pins |
| 21 | Key |
| 22 | Rear Roll Adjusting Shaft |
| 23 | Key |
| 24 | Roll Pin |
| 25 | Spacer |
| 26 | Cover |
| 27 | Cap Screw |
| 28 | Handwheel |
Click to enlarge
