Drive – Single Geared Single End
1. Scroll to view parts below or download a PDF Spec Sheet
2. Once you’ve found your part number and part name, request a parts quote
Questions? Contact Us
(Manual Number: A-13-L-1)
Click to enlarge
Download a PDF Spec Sheet
Single Geared Single End Drive – Form A-13-L-1
NOTE: Flywheel Bearing Lubrication (Once Each Year) Presses with clutch on driveshaft, Serial Nos. 47200 thru 52000: Remove cover from clutch and lubricate through fitting on end of driveshaft.
Presses with Serial Nos. 52000 and above: Lubricate through fitting located on end of driveshaft behind center opening in disc brake. Use Chevron SRI No. 2 grease. Reassemble parts that have been removed before operating press.
Part # | Part Name |
---|---|
12 | Clutch Hub |
13 | Retainer Ring |
14 | Brake Hub |
15 | Ring Gasket |
16 | Flywheel |
17 | Inboard Flywheel Bearing |
18 | Spacer |
19 | Outboard Flywheel Bearing |
21 | Clutch (See Separate Parts List) |
44 | Brake Mounting Plate |
45 | Disc Brake (See Separate Parts List) |
46 | Retainer Ring |
47 | Drive Shaft |
48 | Outer Bearing Retainer |
49 | Retainer Ring |
50 | Roller Bearing |
51 | Retainer Ring |
52 | Retainer Ring |
53 | Locating Bearing |
55 | R.H. Bearing Housing |
56 | Flywheel Brake (Optional-See Separate Parts List) |
57 | Main Gear |
58 | Outer Crankshaft Bushing |
59 | Bushing Dowel |
60 | Inner Crankshaft Bushing |
61 | Crankshaft |
62 | Outer Bearing Cap |
63 | Inner Bearing Cap |
64 | Bearing Cap Stud |
65 | Nut |
66 | Main Gear Key |
67 | Grease Fitting (Where Used) |