Customer Service: (269) 948-3300Field Service: (269) 948-5867

A-110 Bliss Inclinable Presses – Press Numbers 18C through 21.5

Go back to
Bliss Press Parts

Frame, Legs, Crankshaft, and Bearing Caps

 Frame, Legs, Crankshaft, and Bearing Caps
1Frame
2Crankshaft Main Bearing Cap
2-ACrankshaft Main Bearing Cap Bushing
5Crankshaft
6Brake Collar
46-ALeg Tie Rod (Rear)
46-BLeg Tie Rod (Front)
47Leg - Right Hand
48Leg - Left Hand
50-ALeg Pivot Bolt
50-BNut for Leg Pivot Bolt
51-ALeg Clamping Bolt (or stud)
51-BLeg Clamping Bolt Nut

Slide, Connection, Connection Screw, Gibs, & Knockout Brackets

 Slide, Connection, Connection Screw, Gibs, & Knockout Brackets
14Connection Cap
14-AConnection Cap Bushing
15Connection Cap Stud
16Connection
18-AConnection Screw Clamping Plug (Head End)
18-BConnection Screw Clamping Plug (Nut End)
18-CConnection Screw Clamping Plug Screw & Nut
19-AConnection Screw Clamping Plug Anchor Screw
19-BConnection Screw Clamping Screw Nut
20Connection Screw
20-AFelt Washer
23Slide
24Slide Recess Cap
25Slide Recess Cap Stud
26Slide Recess Cap Stud Nut
27Knockout Bar Bracket - Right Hand
27-AKnockout Bar Bracket Screw - Left Hand
28Knockout Bar Bracket Screw (or stud)
29Knockout Bar Adjusting Set Screw
30Knockout Bar Adjusting Set Screw Nut
31-AKnockout Bar
32Main Gib - Left Hand
33Main Gib - Right Hand
34Main Gib Screw (or stud)
191-ABall Cap
192-ABall Cap Bushing
193-ABall Seat
194-AShims
195-AHollow Head Cap Screws
195-BHollow Head Cap Screw Washers

Inclining Attachments

 Inclining Attachments
41Screw Pin
42Cotter Pins
43Inclining Screw
44Thrust Bearing
45ARatchet Assembly
45A-1Ratchet Handle
45A-4Ratchet Wheel (Used With Thrust Bearing)
46Inclining Trunnion

Inclining Attachment Rachet

 Inclining Attachment Rachet
45A-2Ratchet Lever
45A-3Ratchet Wheel
45A-4Ratchet Wheel (With Shoulder For Thrust Bearing)
45A-5Cover Plate
45A-6Pawl
45A-7Spring Housing
45A-8Plunger
45A-9Spring Housing
45A-10Spacer Studs
45A-11Fulcrum
45A-12Stud Nuts
45A-13Lockwashers
45A-14Trip Pin

Backshaft On Geared Presses 19 1/2 B, 20C, 20B & 21 Rolling Key or Pneumatic Clutch

 Backshaft On Geared Presses 19.5 B, 20C, 20B & 21 Rolling Key or Pneumatic Clutch
67Main Driveshaft Bracket
68Main Driveshaft Bracket Cap Screws
70Main Driveshaft Bracket Cap
71Main Driveshaft Bracket Capscrews
73Main Driveshaft
74Pinion
75Pinion and Flywheel Key
75-AMain Driveshaft End Collar
76Flywheel
80Main Driveshaft Bronze Bushings

For Geared 21B – 21S R.K.C. Type G or M Air Clutch

 For Geared 21B - 21S R.K.C. Type G or M Air Clutch
73Main Driveshaft
74Main Drive Pinion
75Pinion and Flywheel Key
75-AShaft End Collar
76Flywheel
109-GMain Driveshaft Roller Bearing Bracket (one piece)
109-HMain Driveshaft Bearings Sleeve
109-JMain Driveshaft Bearing Collar
109-KMain Driveshaft Bearing
109-LMain Driveshaft Bearing Spacer (outer)
109-RMain Driveshaft Bearing Spacer (inner)
109-SMain Driveshaft Bearing Shims

Type “K” Clutch Shaft Assembly (21 1/2 Geared)

 Type "K" Clutch Shaft Assembly (21.5 Geared)
73Main Driveshaft
74Main Drive Pinion
75Main Drive Pinion Key
76Flywheel
109-HMain Driveshaft Bearing Sleeve
109-JMain Driveshaft Bearing Collar
109-KMain Driveshaft Bearing
109-LMain Driveshaft Bearing Spacer (outer)
109-MMain Driveshaft Bearing Spacer (center)
109-RMain Driveshaft Bearing Spacer (inner)
109-SMain Driveshaft Bearing Shims
117-BMain Driveshaft End Bearing Spacer
165-ABrake Bracket
K-11-AFriction Disc Pin (fixed end)
K-11-BFriction Disc Pin (floating end)
K-21-AFriction Disc Pin Plate Screw
K-29Friction Disc Pin Plate
K-49Air Tube Block
K-50Air Tube Block Gasket
K-52Air Tube & Coupling Assembling
K-54Shaft Spacer
32-FWFlywheel Bearing Spacer (center)
33-FWFlywheel Bearing Spacer
34-FWFlywheel Bearing Retainer
36-FWFlywheel Bearing Spacer to Clutch Side
37-FWFlywheel Bearing Spacer to Clamp Side
42-FWFlywheel Bearing Adjusting Shims

Bearings on 21 1/2 R.K.C.

 Bearings on 21.5 R.K.C.
73Main Driveshaft
109-HMain Driveshaft Bearings Sleeve
109-JMain Driveshaft Bearing Collar (Inner & Outer)
109-KMain Driveshaft Bearing
109-LMain Driveshaft Bearing Spacer (Outer)
109-RMain Driveshaft Bearing Spacer (Inner)
109-SMain Driveshaft Bearing Shims

Why use genuine Bliss parts?

① Good and Services Warranty

Purchase press parts with confidence from BCN Technical Services. We guarantee at the time of delivery, the goods will be free from defects in materials and workmanship. We will perform services in a prompt, professional and workmanlike manner. View our Goods and Services Warranty for details.

② Original OEM Specifications

Replacement parts are manufactured to original OEM specifications from record sets maintained by serial number, so there’s no guessing or wondering if a part will fit. We have original drawings, manufacturing expertise, and the experience of a team of engineers who know your press inside and out.

③ Delivery

BCN Technical Services has an extensive inventory of the most requested OEM replacement parts in stock at our facility in Hastings, MI. Over 14,000 unique spare parts for presses are kept on hand. Our experienced staff is dedicated to quickly providing that critical part, which allows you to avoid delayed repairs, lost productivity and lost revenue.

Sign-up to receive updates and important information from BCN Technical Services.

Hours of Operation
Monday–Friday:
8 a.m.–5 p.m.
Saturday–Sunday:
Closed

BCN Technical Services, Inc.

1004 E State St Hastings, MI 49058
269-948-3300
info@bcntechserv.com